
Add to Cart
Lithium Iron Phosphate Battery 12V 200Ah with low temperature feature
1. LiFePO4 Battery 12V 200Ah advantage
2. Specification
NO | Items | Characteristics | |
2.1 | Normal capacity | 200Ah | |
2.2 | Nominal energy | 2.56KWh | |
2.3 | Nominal voltage | 12V (LFP-4S) | |
2.4 | Internal resistance | ≤30mΩ @1kHz AC | |
2.5 | Normal charge voltage | 14.6±0.5V | |
2.6 | Float charge voltage(for Standby use) | 13.8±0.2V | |
2.7 | Allowed MAX charge current | 150A | |
2.8 | Recommended charge current | ≤150A | |
2.9 | Allowed MAX discharge current | 150A,200A 30min@25℃,350A 3S | |
2.10 | End of discharge voltage | 10.0V | |
2.11 | Dimension | 484±3 mm | |
170±3 mm | |||
241±3 mm | |||
2.12 | Weight (No accessories) | 25.0±1.0Kg | |
2.13 | Operation temperature | Charge | 0~45℃ |
Discharge | -20~60℃ | ||
2.14 | Self-discharge rate | Residual capacity | ≤3%/Month; ≤15%/ year |
Recover capacity | ≤1.5%/Month; ≤8%/ year | ||
2.15 | Storage environment | ≤1month | -20~+60℃, 5~75%RH |
≤3month | -10~+45℃, 5~75%RH | ||
Recommend environment | 15~35℃,5~75%RH | ||
2.17 | Heating performance | Charging at -45℃ |
3. Circuit Protection
No | Item | Content | Criterion |
3.1 | Over charge | Over-charge protection for each cell | 3.75±0.05V |
Over-charge release for each cell | 3.60±0.04V | ||
Over-charge release method | Under the release voltage | ||
3.2 | Over discharge | Over-discharge protection each cell | 2.50±0.03V |
Over-discharge release for each cell | 2.80±0.04V | ||
Over-discharge release method | Charging | ||
3.3 | Over current | Charge over current protectionⅠ | 230A±20A, delay time 8s±1s |
Charge over current protectionⅡ | 300A±50A, delay time 1s±0.5s | ||
Charge over current release | Recovering after 8s | ||
Discharge over current protectionⅠ | 230A±20A, delay time 30s±5s | ||
Discharge over current protectionⅠ | 400A±30A, delay time1.0s±0.5s | ||
Discharge over current release | Recovering after 30s | ||
Short circuit protection | Available | ||
3.4 | Temperature | Charge over temperature protection | Protect@55±5℃; Release@45±5℃; |
Charge under temperature protection | Protect@0±5℃; Release@>3℃ | ||
Discharge over temperature protection | Protect@65±5℃; Release@55±5℃; | ||
3.5 | Heating performance | Heating opening condition | Below the charging temperature protection -2℃ Temperature is greater than -30℃ (allowed to open the heating film the lowest temperature) Satisfy the above two conditions to start heating |
Heating closing condition | Stop heating if the temperature is greater than the ending temperature of heating; The discharge state stops heating; Under low temperature protection, stop heating after heating for more than one hour. |
4. Warranty:
5. Our service
6. LiFePO4 battery 12V 200Ah dimension
Your inquiry will be warmly welcomed, looking forward to our long term cooperation.