High energy density
High working voltage for single battery cells
Pollution-free
Long cycle life
No memory effect
Capacity, resistance, Voltage, platform time consistency is good
With short-circuit production function, safe and reliable
Factory price & High quality
Good consistency, low self discharge
Light weight, small size
High discharge rate
Quality and security guaranted,with CE,ROHS approval.
The lifepo4 battery pack is widely used for electric bicycle,golf car,electric bike,electric wheelchair,power tools,electric scooter,emergency light,etc

2. Lithium battery module can be assembled with various cells,

available to make all customzied battery pack. Cell's details as below:

3.2V Lithium Iron Phosphate Cells
Cell Model	Volt(V)	Capacity(Ah)	Inpendance(mΩ)	Weight(g)	Cycle life	Cycle condition
TB-01865135C-12Ah	3.2V	12Ah	≤12	310±10	2000 cycles	100% DOD
TB-02707145C-20Ah	3.2V	20Ah	≤10	525±10	2000 cycles	100% DOD
TB-02707145D-20Ah	3.2V	20Ah	≤4	525±10	2000 cycles	100% DOD
TB-02707180C-25Ah	3.2V	25Ah	≤6	650±10	2000 cycles	100% DOD
TB-02707180D-25Ah	3.2V	25Ah	≤4	650±10	2000 cycles	100% DOD
TB-02707180C-27Ah	3.2V	27Ah	≤4	660±10	2000 cycles	100% DOD

3. Safety test of battery cell

No.	Item	Test Method	Criteria
6.1	Short- circuit Test	A cell is tested in accordance with 3.2, after that the cell is short-circuited by connecting the positive and negative terminals with a wire for 10min, the wire has a maximum resistance load of 5mΩ., then observe for 1h.	No fire, no explosion
6.2	Overcharge Test	A cell is tested in accordance with 3.2, then 1C constant current charged till the voltage reaches 1.5 times of the specified end-off charge voltage, or the charge time reaches 1h, then stop charge, and observe for 1h.	No fire, no explosion
6.3	Over discharge test	A cell is tested in accordance with 3.2, then 1C discharge for 90min, then observe for 1h.	No fire, no explosion, no leakage
6.4	Crush Test	A cell is tested in accordance with 3.2, and then is placed on the crush machine, the axis is parallel to the crush equiment, and it is crushed between two flat surfaces till the crushing force is gradually approaching 200 kN, or voltage reaches 0V,or reaches 30% distortion, then observe for 1h.	No fire, no explosion
6.5	Impact Test	A cell is tested in accordance with 3.2, and then placed on the impact flat. A Φ15.8mm bar is to be placed on the center of the cell. A 9.1kg weight is dropped from a height of 610mm onto the cell, the distortion is allowed.	No fire, no explosion
6.6	Stick Test	a) A cell is tested in accordance with 3.2 b) use φ5mm～φ8mm high temperature resistance steel needle, with speed of 25±5mm/s, to go through the cell from vertical direction of pole plate, the penetrate position should be close to the geometric center of plate surface, the steel needle remains in the cell;	No fire, no explosion
6.7	Heating Test(130℃)	A cell is tested in accordance with 3.2, and then heated in a circulating air oven. The temperature of the oven is raised at a rate of 5℃ per minute to 130℃±3℃ and remain for 30 min.	No fire, no explosion

4. Our Service

Fast Delivery, can handle shipping for customer if needed
Samples are available with charged
2 years warranty
Every battery pack can be customized according to your specific demand. OEM is acceptable.
Expertist technical support and good after-sales service

5. Battery operation instruction

Charging current: Do not surpass the largest charging current that specification stipulated.
Charging voltage: Do not surpass the highest limited voltage that specification stipulated.
Charging temperature: within temperature scope that specification stipulated.
Charge with constant current, then with the constant voltage, no reverse charge, which is dangerous
Special note: Short time doesn't affect the use of the battery overcharge too, but for a long period of time over discharge or over charge can affect the function of the battery failure, or the battery can't use permanent, appear serious safety hazards, need long time floating please use the recommended floating model specification.Battery when not in use for a long time, because of its own self-discharge characteristics can also cause discharge, to prevent the occurrence of a discharge, battery should maintain a certain capacity, maintain the voltage at 50% state of SOC.

6. Lithium battery module solution

Product Tags:

ups battery weight

100ah lithium ion batterypack

48v 100ah lifepo4 battery pack

Inquiry Cart 0